Ftp Client - Abus TVIP71500 Manuel Utilisateur

6.5 FTP client

Settings can be made here for the transmission of snapshots or video clips to an FTP server.
General
FTP client:
FTP server name:
User name:
Password:
Passive mode:
Attached file type:
The settings can be tested using the "Test" button. Accept the settings by
pressing "OK" or cancel them by pressing "Cancel".
Alarm sending
Alarm sending:
Remote path:
Image file name:
Suffix:
Delete sequence number:
Alarm:
Activates or deactivates the transmission of image data to an FTP server.
Enter the IP address or domain name of the FTP server here. If the FTP server where
the data is written is not working through port 21, then the optional port number can be
entered here as <FTP server name:Port>. The maximum length is 64 characters.
User name of the account configured in the FTP server.
Password of the account configured in the FTP server.
Activate this function if the FTP server was configured in passive mode.
Select here whether snapshots or video clips should be transferred to the FTP server.
Activates or deactivates the transmission of image data to an FTP server.
This is the file folder where the images are saved on the FTP server. The
maximum length is 64 characters.
Specify the file name for the image/video file here.
Select the file suffix here. This can be the date and time or a sequence
number.
Resets the sequence number to 1.
In the event of an alarm, certain reactions can be configured for FTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
128