Abus TVIP71500 Manuel Utilisateur page 135

Delete sequence number:
Alarm:
Motion detection:
Network link down:
Alarm input:
Recording time:
Effective Period:
Always:
Schedule:
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
Periodical recording
Periodical recording:
Image file name:
Suffix:
Delete sequence number:
File size:
Recording time
Always:
Schedule:
Resets the sequence number to 1.
Select the event which triggers the storage procedure on the SD-Card.
All set activity masks.
Limited network connections. The configured alarm buffer can be used (see
the "Alarm buffer" section).
The activated digital input can represent the trigger.
Select the recording time on a network drive following an event (1-60
seconds).
The detectors for these alarms are permanently activated.
The detectors for these alarms are activated at defined schedules. Press the
"Schedule" button to configure these settings (see also the "Schedule"
section).
Define the settings for continuous recording SD-Card here. The recording time
can be defined using a schedule.
Specify the file name for the video file here.
Select the file suffix here. This can be the date and time or a sequence
number.
Resets the sequence number to 1.
Indicates the maximum file size (max. 50 MB).
The detectors for these alarms are permanently activated.
The detectors for these alarms are activated at defined schedules. Press the
"Schedule" button to configure these settings (see also the "Schedule"
section).
140