Abus TVIP71500 Manuel Utilisateur page 129

The settings can be tested using the "Test" button. Accept the settings by
pressing "OK" or cancel them by pressing "Cancel".
Alarm sending
Alarm sending:
Image file name:
Suffix:
Delete sequence number:
Alarm:
Motion detection:
Network link down:
Alarm input:
Recording time:
Effective Period
Always:
Schedule:
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
Periodical recording
Periodical recording:
Image file name:
Suffix:
Delete sequence number:
File size:
Activates or deactivates the storage of image data (snapshots) on a network
drive after an event.
Assign a file name for image data storage here. A maximum of 10 letters or
digits are permitted. "_" and "-" can also be used as characters.
The file attachment suffix can be a date and time or a sequence number.
Resets the sequence number to 1.
Select the event which triggers the storage procedure on the network drive.
All set activity masks.
Limited network connections. The configured alarm buffer can be used (see the
"Alarm buffer" section).
The activated digital input can represent the trigger.
Select the recording time on a network drive following an event (5-60 seconds).
The detectors for these alarms are permanently activated.
The detectors for these alarms are activated at defined schedules. Press the
"Schedule" button to configure these settings (see also the "Schedule" section).
Define the settings for continuous recording to a network drive here. The
recording time can be defined using a schedule.
Specify the file name for the image file here.
Select the file suffix here. This can be the date and time or a sequence
number.
Resets the sequence number to 1.
Indicates the maximum file size (max. 50 MB).
134