Abus TVIP71500 Manuel Utilisateur page 118

Windows Messenger
The network camera is equipped with a function for connecting to Windows Messenger. The camera can then
be entered in the Messenger contact list as a chat partner. The video data is displayed over the webcam
function in Windows Messenger. Control of the webcam (pan and tilt) is also possible over the control panel.
A Windows LiveID account for the camera is required for using this function.
Messenger:
Protocol:
Login Account:
Password:
Alias:
Port range:
Video mode:
IP Notification:
Privacy:
User:
Allow list:
The following steps must be carried out on the PC to display the video image in
Windows Messenger.
1) Install Windows Live Messenger.
2) Install the IP Installer on the PC, including the MSN plug-in.
3) Install XVid from the manufacturer's website.
Further information can be found in the IP Installer manual on the supplied
software CD (or under www.abus-sc.com).
4) Set an incoming port release in the router. The default port range is 20000-
21000 (software keywords: port forwarding / release).
Activates or deactivates the Messenger function.
The "msn" protocol is set as standard.
Registered Messenger user name.
Password for the account.
The name of the network camera shown in the Messenger contact list.
This port range is used for communication of the msn protocol.
The picture quality of the transmission is set under this point. The local mode
(MPEG-4) offers a higher-quality picture than the mobile mode (3GPP).
When this option is activated, notification e-mails are sent to the partner in the
contact list.
Specify a user, then press "Add". The user is removed from the list by selecting the
user and pressing "Delete".
Only users in this list can see the video data.
123