Télécharger Imprimer la page

Benchmark BS6050 Manuel page 29

Masquer les pouces Voir aussi pour BS6050:

Publicité

Les langues disponibles

Les langues disponibles

4. PRE-OPERATION CHECK
5W-30
The engine was shipped from the factory without oil. Before you start the engine,
ensure that you add oil according to the instructions in this manual. If you start the
-30
-20
engine without oil, it will be damaged beyond repair and will not be covered under
the warranty.
-20
0
4.1 ADD OIL
1.
Set the snowthrower on a level surface and the power switch to OFF.
2.
Clean the oil fill area of any moisture or debris.
3.
Unscrew the oil dipstick and wipe it off.
4.
Remove the dipstick and fill the oil to the maximum oil mark. Check the oil
level by reinserting the dipstick without rethreading it.
5.
Reinsert the dipstick and tighten securely.
NOTE
  Oil max. capacity: 20 fl. oz. / 600 mL
  SAE 5W-30 or 5W-40 is recommended for general use.
  Use of synthetic oil does not change maintenance intervals.
  DO NOT OVERFILL.
Synthetic 5W-30
10W-30
0°C
-10
32°F
20
40
Oil Cap &
Dipstick
OPEN
10
20
60
80
Oil Capacity: 32 . Oz / 1.1 L
25
30
40
100
120
Max Oil Level
Min Oil Level
BS6050
50
°C
°F

Publicité

loading