Publicité
Les langues disponibles
Les langues disponibles
8.8 REPLACING THE AUGER SHEAR BOLT
1.
Place the unit on a level surface, turn the fuel shut-off valve to CLOSED,
and remove the POWER key.
2.
Remove the existing shear bolt and pin clip.
3.
Add grease to the auger shaft assembly. Spin the auger to lubricate the
auger shaft.
4.
Align the bolt holes. Install a new shear bolt through the auger shaft and
secure with a pin clip.
Speed Selector Lever
TM
48
Publicité
