Publicité
Les langues disponibles
Les langues disponibles
5.1 STARTING THE ENGINE
5.1.1 Electric Start
1
!
5
CLOSED
9
1.
Ensure the auger control and traction control levers are disengaged.
2.
Turn the fuel shut-off valve to OPEN.
3.
Move the throttle lever to FAST.
4.
Insert the POWER key.
1
5.
Turn the choke lever to CLOSED. Note: Leave in OPEN if engine is warm.
!
6.
Press the primer 2 times. Note: Do not press if engine is warm.
7.
Connect an extension cord from a wall receptacle to the electric start
module on the engine.
8.
Press and hold the START button for no more than 5 seconds then release.
If it does not start after 5 attempts consult the troubleshooting chapter.
5
9.
Disconnect the extension cord from the wall receptacle and then from the
starter box.
10. Allow the engine to warm up for several minutes. Gradually move the choke
lever to the OPEN position.
CLOSED
2
OPEN
6
10
OPEN
2
OPEN
6
TM
3
FAST
7
3
FAST
7
30
4
8
4
8
OPEN
Publicité
