Benchmark BS6050 Manuel page 16

3.3 Installing the Speed Selection Rod
The speed selection rod needs to match the height of your handle. There are 4
length positions on the speed selection rod that match the 4 height positions of the
handles. For example, if you assembled your handles at the tallest position choose
the longest length of the speed selector rod. If you assembled your handles at the
shortest position choose the shortest length of the speed selector rod.
1.
Assemble the two parts of the speed selection rod and adjust the height
(1, 2, 3 or 4). Align the holes and secure with pin clip.
2.
Move the speed selection lever to lowest position, Reverse-2 on most
models.
3. Add spring and washer to angled end of speed selection rod. Push rod
through bracket on bottom casing, secure with pin clip.
Speed
Selection Rod
Speed
Selection Rod
Speed Selector Lever
Speed Selector Lever
Spring
TM
Spring
12
Pin Clip
Pin Clip