Publicité
Note: With socket (raw) connections, if you are working with a Virtual Instrument
Software Architecture (VISA) driver or SDK, or with a third-party VISA tool,
you need to ensure that a timeout value is defined in your application or in
the third-party VISA tool. You must also ensure that the termination
character is enabled (typically \n). Do not forget to apply the changes
(some tools require you to specifically press the Apply button first - not just
confirm with OK).
6. Tap Apply to confirm your changes.
FTB-2/FTB-2 Pro and FTB-4 Pro
For information on communicating with TCP/IP over Telnet, see
the section pertaining to communication through TCP/IP over
Telnet.
Preparing for Automation
Changing Communication Settings
255
Publicité
