Publicité
Preparing for Automation
Getting Optimum Performance from Your Unit
Getting Optimum Performance from Your Unit
Several factors influence the data transfer rate of your unit. The information
presented hereafter will help you get the best transfer rate possible.
Output unit (RS-232, ActiveX and TCP/IP): Your unit can return results
in
Since internal units are linear, you will get optimal performance by
using linear units for output (no need for an internal conversion to log).
Note: You must make the choice of output unit for each instrument offering such
a feature. Refer to the user guide of each optical instrument for a list of
available commands and queries.
Output format (RS-232, ActiveX and TCP/IP): Your unit provides the
measurement results in ASCii format.
Note: The configuration of data format cannot be made directly via the ToolBox X
software.
For more information on how to set the output format and data types, see
:FORMat[:DATA](IEEE 488.2 and specific commands appendix), Read and
ReadBinary (COM properties and events appendix), and the data types
appendix.
250
linear units (for example, watts)
log units (for example, dBm)
FTB-2/FTB-2 Pro and FTB-4 Pro
Publicité
