Télécharger Imprimer la page

EXFO FTB-2 Guide De L'utilisateur page 264

Masquer les pouces Voir aussi pour FTB-2:

Publicité

Preparing for Automation
Communication
ActiveX (COM)
ActiveX (DCOM)
(Ethernet,
TCP/IP)
RS-232
Telnet and
Socket (Ethernet,
TCP/IP)
For more information on programming aspects, see the section on using
your product in an automated test environment.
248
Allows you to develop an application that will run locally on your
unit within Windows.
Best approach when speed is your top priority (no physical
connection that slows down the process).
Supported by most development software.
Lower cost.
Allows the sharing of network resources.
Allows you to develop computer-based applications to directly
communicate with your unit.
USB to RS-232 adapter (purchased from EXFO) required to
establish connection between the computer and your unit.
For increased speed and performance, run the application
locally on your unit through ActiveX instead of using RS-232.
Your unit can be directly connected to a Local Area Network
(LAN) or Wide Area Network (WAN) via its 10/100/1000 Base-T
interface.
Allows the sharing of network resources.
Allows you to develop computer-based applications very easily
to directly communicate with your unit.
Telnet allows you to send SCPI commands using a Telnet
terminal window.
Socket allows you to send the same SCPI commands as you
would in Telnet, but without any formatting (raw
communication). The socket communication is similar to a
communication by RS-232, but over a LAN connection.
Characteristics
FTB-2/FTB-2 Pro and FTB-4 Pro

Publicité

loading

Ce manuel est également adapté pour:

Ftb-2 proFtb-4 pro