Panasonic KX-TGA914EX Manuel Utilisateur page 13

All manuals and user guides at all-guides.com
TGA914EX_1(e).book Page 13 Tuesday, August 8, 2006 2:21 PM
When you finish monitoring, press
{ih} or place the handset on the base
unit or charger.
Useful settings while camera
monitoring
With a handset, you can set the camera
settings while monitoring.
Adjusting the display brightness
There are 6 levels.
1
Start monitoring (page 11).
2
Press B repeatedly to adjust the
brightness.
Note:
L When you finish monitoring, the setting is
reset to the default.
Selecting image zoom
1
Start monitoring (page 11).
2
Press A to zoom in on the image.
L To return to the original view, press
A again.
Camera Monitoring
Setting the audio detection sensitivity
The cordless camera features a sensor that
detects human voices such as a baby cry.
Sounds other than human voices may be
difficult to detect. To use this feature, confirm
that the cordless camera is located in a
place where it can easily detect voices.
Once the sensor has detected sound, the
cordless camera pages the handset.
There are 3 levels. The default setting is
"off".
1
Start monitoring (page 11).
2
v
3
To turn the feature on, push the joystick
up.
Push the joystick up or down to select the
desired sensitivity.
L To turn this feature off, push down the
joystick repeatedly.
4
L
Note:
L When you turn this feature off, the
cordless camera cannot detect sound
(page 12).
L To set the appropriate level, test the
sensor of the camera from the handset
beforehand.
13