Panasonic KX-TGA914EX Manuel Utilisateur page 15

All manuals and user guides at all-guides.com
TGA914EX_1(e).book Page 15 Tuesday, August 8, 2006 2:21 PM
Mounting the cordless camera on the wall
Standard mounting
1
Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 16).
(220–240 V, 50 Hz)
Upside down mounting
L The image may be seen upside down when mounting upside down. To compensate for this,
change the cordless camera setting to display images upside down (page 9).
1
Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 16).
(220–240 V,
50 Hz)
2
Mount the cordless camera (A), then
slide it down (B) and to the right (C) until
it is secure.
L To aim the camera lens, see page 8.
51 mm
Screws
2
Mount the cordless camera (A), then
slide it down (B) and to the left (C) until
it is secure.
51 mm
Screws
Useful Information
A
B
C
A
B
C
15