Operating From The Control Panel; Wifi Function - DeLonghi PINGUINO SMART Mode D'emploi

OPERATING FROM THE CONTROL PANEL

TURNING THE APPLIANCE ON/OFF
will be automatically reduced and in the next few minutes it will
be further reduced.
To turn the appliance o , touch the
Note: Never turn o the air conditioner by simply pulling the
plug. Touch the key in order to put your air conditioner in
stand-by and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status checks.
AIR CONDITIONING MODE
This is ideal for hot and humid weather
when the room needs to be both cooled
and dehumidi ed.
To correctly set this mode:
• Touch repeatedly the MODE key until
the air conditioning symbol appears.
The display will show the desired tem-
perature.
Before plugging the appliance
check the cap on back of the
unit is correctly inserted on
drainage hose A11.
Insert the plug in the socket.
Two dashes appear on the display
indicating that the appliance is in
stand-by.
Touch the C1 key to turn on the
appliance.
When the appliance comes on, the
last function set before it was shut
o is activated.
NOTE: After few seconds of the con-
trol panel inactivity, its brightness
key.
MODES SELECTION
To select the desired operating mode,
touch repeatedly the MODE key until
the desired function is selected.

WiFi FUNCTION

To select or deselect the Wi func-
tion, keep touched the MODE key for
3 seconds.
To change the temperature to be reached, touch the < C4
•
or > C3 key.
Note: The most suitable temperatures, during the summer
range from 75 to 81°F. However, setting the temperature signi -
cantly lower than the outdoor temperature is not recommended.
In conditioning mode, the air ow can be selected only from the
remote control and app.
DEHUMIDIFYING MODE
This is ideal for reducing humidity in the
room (spring and autumn, damp rooms,
rainy periods, etc). For this type of use, the
appliance must be set up as for air condi-
tioner mode. That is, the air exhaust hose
B3 must be tted to the appliance to allow
the humidity to be discharged outside.
To correctly set this mode:
• Touch repeatedly the MODE key until
• The appliance automatically chooses
FAN MODE
When using this mode, the air exhaust
hose B3 does not need to be attached to
the appliance.
To correctly set this mode:
• Touch repeatedly the MODE key until
• Select the desired air ow by touching
The available air ows are:
Minimum air ow: when maximum silent
operation is desired.
Medium air ow: when the noise level needs to be
low but with a good comfort level.
Maximum air ow: for maximum performance.
HEATING MODE
This is ideal in spring and autumn when
outdoor temperatures are not particular-
ly severe. For this mode, the appliance
should be prepared in the same way as for
air conditioning, with the air exhaust hose
B3 attached.
8
the dehumidifying symbol appears.
the best air ow.
the fan symbol appears.
the i< C4 or > C3 key.