Connecting To Your Sound System; Connecting; Turning Off - Marmitek BOOMBOOM 75 Guide Utilisateur

3.4

Connecting to your sound system

Connect the mini jack-plug to the AUX IN on a docking speaker or
radio/CD player, for example.
Use the converter cable supplied to connect the BoomBoom 75 to
the AUX IN coaxial (Cinch/RCA) connection on your sound
system.
3.5

Connecting

1. Locate your Bluetooth music source in the vicinity of the
BoomBoom 75. The best distance is around 1 metre.
2. Ensure that the BoomBoom 75 is off.
3. Press the button on the BoomBoom 75 until the LED starts to
blink red and blue.
4. Switch your device's Bluetooth function on according to the
instructions of your device and go to Bluetooth settings.
5. Scan for new devices and select the name "BoomBoom75".
6. If the Bluetooth connection process requires a password,
enter "0000". The BoomBoom 75 then connects with your
device by briefly lighting up the red LED. You will also hear a
signal via the connected sound system. The connection has
now been made and your device is linked to the BoomBoom
75. You can now play and control the music in your device
on your sound system.
! You can link to up to 8 devices however only 1 device can be
connected to the BoomBoom 75 at one time.
3.6

Turning off

Depress the BoomBoom 75's button for 4 seconds. The red LED
will blink for 3 seconds and then go out.
6 © MARMITEK