Installation Of The Ir (Infrared) Extension Cables - Marmitek GigaView 545 Guide Utilisateur

INSTALLATION OF THE IR
(INFRARED) EXTENSION CABLES
1. Plug the IR Sensor Extender cable into
the IR IN connector [5] on the GigaView
545 Receiver and place this in sight of the
Remote Control.
2. Plug the IR LED Extender cable into the IR OUT connector [3] on the
GigaView 545 Transmitter. Attach the IR LEDs to the front of your
A/V (audio/video) devices. This will now send all received infrared
commands via the IR Sensor Extender cable.
Place the LEDs from the IR extender cable precisely on the IR window
(infrared sensor) on the A/V equipment that you wish to operate.
x
Ensure that the IR extender cable's LEDs are stuck precisely on the
A/V device's infrared sensor (this can be extremely accurate on some
devices). The exact position can easily be located by shining a torch
on the front panel and looking for the IR sensor window.
x
All IR LEDs include self-adhesive film with which they are attached to
your A/V equipment.
x
Test the position and the performance of the IR LEDs before you
secure them to the IR window on your A/V equipment.
x
If you use just one or two of the three LEDs, you can leave the other
IR LEDs unused. Never remove them from the extender cable!
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its
packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should
be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and
other electric and electronic equipment via designated collection facilities appointed by the government or local
authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment
and human health. For more detailed information about the disposal of your old equipment, please contact your
local authorities, waste disposal service, or the shop where you purchased the product.
8 © MARMITEK