AVG AVI- 366IS2 - IOWA Instructions D'installation Et Guide De L'usager page 23

INSTALLING THE UNIT (continued)
Step 4
Bring the two duct pieces together over the support frame
brackets and reattach the (2) set screws. Make sure the tongue
and groove clips are realigned. Slide attached duct over the
ceiling mount. Be sure the duct slides over the (2) mounting clips
on each side.
Step 5
The duct should cover the (2) mounting clips on the sides of the
ceiling brackets. Screw in (4) (type c) screws through the
predrilled holes in the duct work into the 4 mounting brackets.
Step 6
Install (1) round flexible duct exhaust hose (F) to round vent
air flap (attached to rangehood on top of unit) and secure
with duct tape.
Note: If you are choosing the ductless/recirculating mode do
not install the duct exhaust hose.
23