Metabo HPT NR 90AC5 Manuel D'instructions Et De Sécurité page 9

NOTE: The information contained in this Manual is designed to assist you in the safe operation of the Nailer.
Some illustrations in this Manual may show details or attachments that diff er from those on your own Nailer.
NAME OF PARTS
SINGLE SEQUENTIAL ACTUATION MECHANISM
(Switching device: upward position)
● When the screw is attached, the tool is fi xed to SINGLE SEQUENTIAL ACTUATION.
● To operate in CONTACT ACTUATION, the screw should be removed by following the
steps in "How to Remove the screw" provided in the "METHODS OF OPERATION".
Top Cover
Exhaust Cover
Piston O-Ring
Piston
Driver Blade
Nose
Adjuster
Push Lever
OPERATION
Nailing operation switching device
Upward position
Switching
Device
Valve part
Body
Nail Feeder (A)
Nail Feeder (B)
Firing Head (Outlet)
CONTACT ACTUATION MECHANISM
(Switching device: downward position)
Enlarged view of the valve part
Filter
Air Plug
Cap
(Sold separetely)
Magazine
Ribbon Spring
English
Switching
Device
Downward position
Screw
Trigger
Switching Device
Nail Stopper
Push Lever Stopper
Push Lever
9