Metabo HPT NR 90AC5 Manuel D'instructions Et De Sécurité page 10

English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
● Be sure to use only the genuine metabo HPT nails for the NR90AC5. The use of any other nails can result
in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Plastic-collated strip nails
Full-head nails
21°
10
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
19-13/16" × 13-7/8" × 4-3/4"
(503 mm × 353 mm × 121 mm)
9.0 lbs (4.1 kg) (Without Hook)
50 – 60 nails (2 strips)
.099 ft
(2.8 ltr/cycle at 6.9 bar)
(2.8 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
WARNING
Min.
.286" (7 mm)
.113" (2.9 mm)
/cycle at 100 psi
3
)
2
Max.
.327" (8.3 mm)
.162" (4.1 mm)
)
2