Publicité
Les langues disponibles
Les langues disponibles
Connections
Connecting to a TV
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
✎
NOTES
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual
of your TV.
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for
the first time, the player automatically sets the HDMI output resolution to the highest supported by
the TV.
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI
cable.
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
8
You can connect the Blu-ray player to an audio system using illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
Connecting to an HDMI supported AV receiver
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your receiver.
• Best quality (Recommended)
Audio
Video
Connecting to an Audio System
Audio
Publicité
