Publicité
Les langues disponibles
Les langues disponibles
SAFETY
SAFETY
INSTRUCTIONS
INSTRUCTIONS
Proper maintenance
Do not operate
a damaged lift.
and inspection
is necessary
c
for safe operation.
SAFETY
CAUTION
INSTRUCTIONS
Authorized personnel
Read operating
only in lift area.
and safety manuals
before using lift.
©
WARNING
CAUTION
Use vehicle
Position vehicle
manufacturer's
with center of gravity
lift points.
midway between
adapters.
©
Do not override
self-closing
lift controls.
©
WARNING
WARNING
Keep feet
Remain clear of lift
clear of lift
when raising or
while lowering.
lowering vehicle.
©
WARNING
WARNING
Clear area if vehicle
Avoid excessive
is in danger of falling.
rocking of vehicle
while on lift.
c
All manuals and user guides at all-guides.com
SAFETY INSTRUCTIONS
• Daily inspect your lift. Never operate if it malfunctions or if it
CAUTION
? ?
?
• Thoroughly train all employees in use and care of lift, using
Lift to be used
• Never allow unauthorized or untrained persons to position
by trained operator
only.
©
©
• Prohibit unauthorized persons from being in shop area while lift
• Do Not permit anyone on lift or inside vehicle when it is either
• Always keep area around lift free of tools, debris, grease and
• Never overload lift. Capacity of lift is shown on nameplate af-
©
• Do Not stand in front of the lift or vehicle while it is being posi-
• Do Not hit or run over lift arms or adapters. This could damage
• Load vehicle on lift carefully. Position lift adapters to contact
©
DO NOT go under vehicle if locking latches are not engaged.
• Do Not block open or override self-closing lift controls; they are
CAUTION
CAUTION
• Remain clear of lift when raising or lowering vehicle.
• Always use safety stands when removing or installing heavy
• Avoid excessive rocking of vehicle while on lift.
Always use
• Clear area if vehicle is in danger of falling.
safety stands when
removing or installing
©
• Remove tool trays, stands, etc. before lowering lift.
heavy components.
©
CAUTION
• Release locking latches before attempting to lower lift.
• Position lift arms and adapters to provide an unobstructed exit
Auxiliary adapters
may reduce
load capacity.
©
©
2
has broken or damaged parts. Use only qualified lift service
personnel and genuine Rotary parts to make repairs.
manufacturer's instructions and "Lifting It Right" and "Safety
Tips" supplied with the lift.
vehicle or operate lift.
is in use.
being raised or lowered.
oil.
fixed to the lift.
tioned in lift bay.
lift or vehicle. Before driving vehicle into lift bay, position arms
and adapters to provide unobstructed entrance onto lift.
at the vehicle manufacturer's recommended lift points. Raise
lift until adapters contact vehicle. Check adapters for secure
contact with vehicle. Raise lift to desired working height.
designed to return to the "Off" or Neutral position
when released.
• Do Not remove or disable arm restraints.
components.
before removing vehicle from lift area.
Publicité
