Timer control
You can use the timer in two different ways :
a) You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up.
b) You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99 min.
Using the timer as a minute minder
1. Make sure the hob is turned on and a cooking zone is in use.
2. Touch
The display will show "10" whilst the number "0" will flash.
3. Whilst "0" is flashing, set the required time by touching the selector.
4. Touch
and "1" will flash.
5. Whilst "1" is flashing, set the required time by touching the selector.
The maximum time that can be set is 99 minutes.
6. Touch
and the timer begins counting down. The display will show the remaining time.
7. Buzzer will beep and the timer indicator shows "- - " when the set time elapses.
To switch a cooking zone off automatically
1. Touch the cooking zone selection key you want to set the timer for.
2. Touch
The display will show "10" whilst the number "0" will flash.
A red dot will appear next to the heat setting display to indicate that the cooking zone is selected.
3.
Whilst "0" is flashing, set the required time by touching the selector.
33