THOMSON THI3PLANCHA Manuel D'utilisation page 39

Specific failure and solution
Failure
The LED does not come on
when the hob is plugged in.
Some buttons don't work, or
the LED display
is not working normally.
The cooking mode indicator
comes on, but heating does
not start.
Heating suddenly stops
during operation and the
symbol flashes on the
display.
Heating zones of the same
side (such as the first and
the second zones ) would
display the symbol .
Fan motor sounds
abnormal.
The above are the judgment and inspection of common failures.
Please do not disassemble the appliance by yourself to avoid any dangers and damages to the induction
hob.
Problem
No power supplied.
The accessorial power board and
the display board connected
failure.
The accessorial power board is
damaged.
The display board is damaged.
High temperature of the hob.
There is something wrong with
the fan.
The power board is damaged.
Pan type is incorrect.
Pot diameter is too small.
The hob is overheated.
The power board and the display
board connection fails.
The display board of
communicate part is damaged.
The Main board is damaged.
The fan motor is damaged.
38
Solution
Check to see if plug is secured tightly in
outlet
and that outlet is working.
Check the connection.
Replace the accessorial power board.
Replace the display board.
Ambient temperature may be too high. Air
intake or air vent may be blocked.
Check whether the fan runs smoothly. If not,
replace the fan.
Replace the power board.
Use a correct pan (refer to 'Pan').
The hob is overheated. Wait for temperature
to return to normal. Touch
hob.
Pan detection circuit is damaged, replace the
power board.
Check the connection.
Replace the display board.
Replace the power board.
Replace the fan.
to restart the