Technical Data - TOOLCRAFT TCWS 20-LI Solo Mode D'emploi Original

12. Technical data

Rated voltage ......................................................................... 20 V/DC
Suitable rechargeable batteries (not included) ....................... TOOLCRAFT 20 V/4.0 Ah Li-ion TCEA20-LI 4.0
Suitable charger (not included) ............................................... TOOLCRAFT 20 V Li-Ion TCSL 20 V-LI 2.2
Rated idling speed n .............................................................. 8000 min
0
Disc diameter .......................................................................... 115 mm
Threaded disc holder .............................................................. M14
Weight .................................................................................... 1.5 kg
Sound pressure level L
Sound power level L ............................................................ 86.7 dB (A)
WA
Standard deviation K .............................................................. 3 dB (A)
Vibration level (in accordance with EN 60745) ....................... 5.642 m/s²
Uncertainty K .......................................................................... 1.5 m/s²
Dimensions ............................................................................. 290 x 110 x 115 mm
Operating conditions ............................................................... 0 to +40 °C / 30-85% relative humidity
Storage conditions .................................................................. 0 to +40 °C / 0-85% relative humidity
Warning!
The noise level of the appliance may exceed 80 dB(A). Wear suitable ear defenders to prevent hearing
damage.
The vibration emission value stated in this manual was obtained using a standardized EN 60745 test pro-
cedure. The result can be used to compare vibration levels of different electrical tools. It can also be used
to obtain a preliminary estimate of your exposure to vibrations.
The specified value indicates the vibration level when the tool is used for its intended purpose. The actual
vibration level may differ from the specified value if the tool is used for other purposes, if other tools are
used, or if the tool has not been serviced properly. These factors can considerably increase your exposure.
For an accurate estimate of your exposure, you must also account for the times when the appliance is
switched off or switched on but not actually in use. These factors can considerably reduce your exposure.
Take additional safety measures to protect the operator against the effects of vibration, e.g.: Maintenance
of electric tool and insertion tools, keeping your hands warm, organisation of work processes.
32
........................................................ 75.7 dB(A)
PA
TOOLCRAFT 20 V/2.0 Ah Li-Ion TCEA 20-LI 2.0
-1