Residual Risks - TOOLCRAFT TCWS 20-LI Solo Mode D'emploi Original

• Large workpieces tend to sag under their own weight. This can lead to the disc seizing up, resulting in
kickback. It is therefore necessary to support large workpieces sufficiently on both sides of the disc, as
well as on the edges.
• Use extra care when carrying out "plunge cuts". The disc could hit gas or water pipes, electrical lines or
other objects behind the cut surface, causing the disc to seize up and resulting in kickback. In addition,
there is the risk of electric shock or an explosion with gas lines.
g) Residual risks
This appliance complies with technical regulations and relevant safety regulations. However, the following
may still occur during use:
- Danger to the life and limbs of the user or other people.
- Damage to the appliance.
- Damage to other material assets.
26