Intended Use; Delivery Content - TOOLCRAFT TCWS 20-LI Solo Mode D'emploi Original

3. Intended use

The appliance is designed for dry cutting and roughing of tiles or workpieces made of concrete or metal. A suitable
disc should be used for each application.
This appliance is designed for use in private premises. Commercial use is not permitted.
It may only be used in dry indoor locations.
For safety and licensing reasons, you must not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause hazards such as
injury, a short circuit, fire, etc.
Read through these original operating instructions carefully and keep them in a safe place. If you pass the product on
to a third party, please hand over these original operating instructions as well.
All company and product names are trademarks of their respective owners. All rights reserved.

4. Delivery content

• Cordless disc grinder (standalone version without battery and charger)
• Grinding disc
• Additional handle
• Face pin wrench
• Original operating instructions
Updated original operating instructions
Download the up-to-date original operating instructions at www.conrad.com/downloads or scan
the QR code shown. Follow the instructions on the website.
20