Installing The Apica Air; Connecting File Clip, Lip Hook And Extension Cord; Connecting Charge Base - Precision Tech Apica Air Mode D'emploi

4. INSTALLING THE APICA AIR

4.1 Connecting file clip, lip hook and extension cord

Connect file clip, extension cord and lip hook to APEX locator as shown in the picture.
Also, use both extension cords according to actual situation.

4.2 Connecting charge base

Plug the USB of adapter into the charge base,
and plug the other end into a power outlet.
Note
• Only the original adapter could
be used.
30
Note
• Please use the original file clip and lip hook that
manufactured by Sifary. Because the size of the
unoriginal file clip and lip hook are different,
it may damage the APEX locator or cause
deviation of measurement accuracy.
Put the APEX locator in the groove in the middle
of the charge base. The power LED on charge
base will light up. And the interface of APEX
locator will light up to show that is charging
Note
• Put the APEX locator on the
charge base in the right
direction, otherwise the APEX
locator will not be charged.
Power LED