Troubleshooting - Precision Tech Apica Air Mode D'emploi

8. TROUBLESHOOTING

When trouble is found, check the following points before contacting your distributor. If
none of these are applicable or the trouble is not remedied even after action has been
taken, the product may have failed. Contact your distributor.
PROBLEM
The power is not turned on.
No charge indicator flash on
handpiece screen.
No sound.
40
CAUSE
The battery is flat.
Press the power switch too short
time.
Put the APEX locator on the
charge base in the wrong
location.
Charging is completed.
The charge base is broken.
Beep volume is set to 0.
SOLUTION
Charge the battery.
Long press the power
switch.
Check the location.
Checking the instructions
of the battery.
Contact your distributor.
Set beep volume to 1,
2 or 3.