6. Specifications
Model
Display
Measurement range
Accuracy
Inflation
Deflation
Measurement method
IP classification
Power source
Battery life
Operating temperature / humidity
Storage temperature / humidity / air pressure
Weight
Dimensions
Cuff circumference
Memory
Contents
Applied part
Protection against electric shock
Notes:
• These specifications are subject to change without notice.
• In the clinical validation study, the 5th phase was used on 85 subjects for determination of diastolic blood pressure.
34
• This device has not been validated for use in pregnancy.
BP786CANN
HEM-7321T-CA
LCD digital display
Pressure: 0 to 299 mmHg
Pulse: 40 to 180 beats / min.
Pressure: ±3 mmHg or 2% of reading
Pulse: ± 5% of display reading
Fuzzy-logic controlled by electric pump
Automatic pressure release valve
Oscillometric method
IP 20
4 "AA" batteries 1.5V or AC adapter (INPUT AC100-240V 50/60Hz 0.12A)
Approximately 1000 measurements (using new alkaline batteries)
50°F to 104°F (10°C to 40°C) / 15 to 90% RH
-4°F to 140°F (-20°C to 60°C) / 10 to 95% RH / 700 to 1060 hPa
Monitor : Approximately 14 1/8 oz. (400 g) not including batteries
Arm cuff : Approximately 5 3/4 oz. (163 g)
Monitor : Approximately 4 7/8" (w) × 3 1/2" (h) × 6 3/8" (l)
(124 mm × 90 mm × 161 mm)
Arm cuff : Approximately 5 3/4" × 21" (air tube: 29 1/2")
(145 mm × 532 mm (air tube: 750 mm))
9" to 17" (220 to 420 mm)
Up to 100 per user
Monitor, ComFit™ Cuff, AC adapter, 4 AA batteries, instruction manual, quick start guide
= Type BF
Internally powered ME equipment (When using only the batteries)
= Class II ME equipment (AC adapter)