Publicité
Les langues disponibles
Les langues disponibles
2. Preparation
2.3 Setting the TruRead
The TruRead
take a measurement, and deflate - 3 times, separated by a short interval between
each measurement. The TruRead
1.
Select your USER ID (1 or 2).
2.
Press the
The TruRead
1)
Press
"oFF".
2)
Press the
If "on" is selected the interval setting appears.
3)
Press
It can be set 15, 30, 60, or 120 seconds.
4)
Press the
3.
To set the date and time, proceed to section 2.4.
If the date and time are correct, press the START/STOP button to turn the monitor off.
10
TM
Mode takes 3 consecutive measurements. The monitor will inflate,
button.
TM
symbol (
) appears on the display.
or
buttons to select "on" or
button to confirm.
or
buttons to change the interval.
button to confirm.
TM
Mode
TM
Mode is set "oFF" by default.
Publicité
