Publicité
Everest III User Guide
Label design requirements
The Everest printer Windows compatible software ships with a label editor called CD Designer™, which is
installed on your PC during a typical installation of the Rimage software. If you have a Windows based PC, you
can use CD Designer to design your labels.
Notes:
CD Designer is not Macintosh compatible and will not be installed with the Macintosh compatible
software.
If you are using a Macintosh computer or you have another software application that you prefer, you
can create a label and save it as an Acrobat
Important!
If you are using a standalone Everest printer or an AutoEverest AutoPrinter, you can print using a label
file designed in any program.
If your Everest printer is on a Rimage autoloader (except the AutoEverest AutoPrinter) and using
Windows compatible software, only the Acrobat (.pdf) or CD Designer (.btw) file can print directly to the
Everest printer.
Creating a label without CD Designer
To create a label with a software application other than CD Designer, use the following criteria:
• Color depth – Save the artwork for the label with
the color set to millions of colors.
•
DPI – Use pictures or logos set to 300 DPI (dots
per inch).
•
Label design size – A full size disc is 120 mm
(4.723"). The hole is 15 mm (0.59"). The printable
area and hub sizes vary depending on the disc
manufacturer.
•
Media – The media that is in Rimage Media
Kits™ has a printable area of 24-118 mm. On
most labels, print settings of 24 mm and 118 mm
are recommended. For more information about
Rimage Media Kits™ – convenient packages of
thermal retransfer-printable discs and ribbons, all
guaranteed
by Rimage – contact Rimage at 800-
445-8288.
2
All manuals and user guides at all-guides.com
®
(.pdf) file, a .jpg file, or a .tiff file.
Printable
Area 118 mm
Hub Size
24 mm
110875_B
Publicité
