Publicité
Everest III User Guide
Adjust the print alignment and color density (Macintosh)
In the Everest III Utility, you can adjust the print alignment and the color density.
Tip: The Everest III Utility allows you to view information such as the current firmware version, the serial
number, and the installed ribbon type. Through the Everest III Utility, you can also update your printer
firmware.
1.
Navigate to the Everest III Utility.
Note: The settings in the Everest III Utility can be modified only when the Everest printer is idle (no jobs
currently printing).
a.
Navigate: System Preferences > Print & Fax. The Print & Fax window opens.
b.
If you are using OS X v10.3, in the Print & Fax window, select Set up Printers. The Printer list opens.
c.
From the printer list, select CDPR22. The CDPR22 window opens.
d.
From the CDPR22 toolbar, select Utility. The Everest III Utility opens.
2.
In the Everest III Utility, select the Alignment tab. The alignment settings display.
3.
View or change the alignment settings.
a.
To modify the horizontal alignment, in the Horizontal Alignment Settings pane, move the All Color
slider.
b.
To modify the vertical alignment, in the Vertical Alignment Settings pane, move the Color and
Monochrome sliders.
4.
View or change the color density settings.
a.
In the Everest III Utility, select the Density tab. The density settings display.
b.
To modify the color density settings, in the Color Density Settings pane, move the Cyan, Magenta, and
Yellow sliders.
c.
To modify the grayscale density settings, in the Grayscale Density Settings pane, move the Black
slider.
5.
To save the modified settings, select Save.
or
To close the window without saving your changes, select Quit.
14
All manuals and user guides at all-guides.com
110875_B
Publicité
