Everest III User Guide
Set the printable area (PC)
This functionality allows you to adjust the printable area settings for standard CD/DVD 120 mm media. This
allows you to set the outer and inner diameters to print the disc label without overlapping the disc edges.
Note: Printable area settings created within a CD Designer label file will override the printer and fax settings
on Windows.
1.
Navigate to printing preferences. Refer to page 8.
2.
Select the Advanced tab.
3.
View or change the printing preferences.
a.
To modify the printable area, select Modify. The Printable Area Settings window opens.
b.
In
th
e Standard Area settings, en
The desired outer diameter
The desired inner diameter
c.
To print on a disc with a stacking ring, select Advanced.
d.
In the Hub Area settings, enter:
The desired outer diameter
The desired inner diameter
e.
To appl
y the settings, select OK.
or
To close the window without applying the settings, sel
4.
When you have made the desired choices, select Appl
5.
To
close the Printing Preferences
Ti
p:
Most discs like the one sho
the following printable areas:
Outer Diameter: 118 mm
Inner Diameter: 24 mm
10
All manuals and user guides at all-guides.com
ter:
window, select OK.
wn above have
Tip Most discs like th
:
printable areas:
Standard Area
Hub Area
ect Cancel.
y.
e one shown above have the following
Outer D iameter 118 mm
Inner Diameter 38 mm
Outer Diameter 35 mm
Inner Diameter 24 mm
110875_B