Abus TVIP11502 Mode D'emploi page 96

Passive mode:
Test:
SMTP:
SMTP server address:
Server port:
SSL:
Authentication:
SMTP:
POP before SMTP:
E-mail sender:
E-mail recipient:
Test:
HTTP:
Use this function to save image data (individual images) on an HTTP server. A CGI script on the HTTP server
must be able to receive the data. In the event of questions, please contact your network administrator.
URL:
Port:
User ID:
Password:
Repeat password:
Proxy address:
Proxy port number:
Proxy user name:
Proxy password:
Test:
Network drive:
Type:
Windows network (SMB/CIFS)
Network storage capacity: Entry of the IP or drive/folder of the network drive
Workgroup:
User name:
Password:
Repeat password:
Create folder:
Test:
Unix network drive (NFS):
Enable this function if the FTP server was configured in passive mode.
When this button is pressed, the FTP server settings are tested. A test file is
uploaded to the FTP server
Enter the address of the outgoing e-mail server here (SMTP server).
The standard SMTP server port is 25. An alternative port can be assigned if
required.
If the e-mail server uses SSL, it can be enabled here.
Define the authentication type for the e-mail account here.
If authentication on the e-mail server requires a user name and password, this
option must be enabled.
Select this option if e-mails must be retrieved before e-mails can be sent. It may
be possible to delete "POP before SMTP" in the e-mail account settings.
This is the address of the e-mail account. The maximum length is 64 characters.
The e-mail address of the recipient. The maximum length is 64 characters.
When this button is pressed, the SMTP server settings are tested. A test file is
sent to the e-mail recipient.
Enter the URL of the HTTP server (e.g. "192.168.0.156/cgi-bin/webcam").
Enter the port on which the HTTP server operates.
User ID on the HTTP server
Password on the HTTP server
Reenter the password here.
Server name when a proxy server is used
Port number of the proxy server
User ID on the proxy server
Password on the proxy server
When this button is pressed, the HTTP server settings are tested. A test file is
sent to the HTTP server.
Protocol selection between the Windows network (SMB/CIFS) or UNIX network
(NFS)
Ex.: \\IP\Folder
Ex.: \\my_nas:\Folder name
Workgroup of the Windows network drive
User name of the workgroup.
Password of the workgroup.
Reenter the password for the workgroup here.
An additional subfolder is created on the network drive.
When this button is pressed, the network drive settings are tested. A test file is
sent to the network drive.
96