Abus TVIP11502 Mode D'emploi page 87

Accessing the network camera over DDNS
If the network camera is located behind a router, then access via DynDNS must be configured in the router.
On the ABUS Security-Center homepage
configuration for common router models.
The following diagram offers an overview of accessing a network camera behind a router via DynDNS.org.

192.168.0.1
Port forwarding of all relevant ports (at least RTSP + HTTP) must be set up in the router
in order to use DynDNS access via the router.
Accept the settings by pressing "SAVE" or cancel them by pressing "Cancel". If
the network configuration is changed, then the camera must be restarted (System
\ Initialize \ Restart).
www.abus.com

195.184.21.78:1026
LAN WAN
,
you can find a description of DynDNS router
Internet

195.184.21.78:1026

name.dyndns.org:1026  195.184.21.78:1026
DynDNS.org
Name Server
87

http://name.dyndns.org:1026