Vortice VORT HR 200 BP Manuel D'instructions page 42

ENGLISH
No Frost
The frost protection procedure is carried out automatically by the device when necessary. A blocking signal will be
generated if the procedure does not work (pre-heater with temperature too low). The system will remain inactive for
an hour; after which, the device will automatically reset the error, and the cycle will reactivate and repeat from the
beginning.
MAIN MENU
USE MENU
ALARM
SETUP
Setup
You can access the Date and Time setting and weekly programming with this option
MAIN MENU
USE MENU
ALARM
SETUP
Set the Date and Time as follows:
1. search for the variable you wish to change, pressing
2. select the variable, pressing
3. search for the desired value, pressing
4. store the selected value, pressing
5. return to point 1 and so on.
DATE&HOUR
42
;
or
;
SETUP
or ;
;
ALARM
NO FROST
WAIT
1 HOUR
SETUP
DATE&HOUR
DATE&HOUR
FRIDAY
dd: 14
yy: 18
hh: 08
mm: 23