Publicité
Les langues disponibles
Les langues disponibles
B) Phono encoding
1) Select " PHONO/AUX " mode and then press " REC " directly.
2) Then the system will show "REC>>CARD" or "REC>>USB" and flashing. Encoding is
performing now.
3) Start playback at Phono for the track which you want to record to media position.
4) To finish the recoding, press the " / ENTER" button. The text on LCD display stop flashing
and return to "PHONO/AUX" mode.
C) Cassette encoding
1) Select "TAPE" mode and then press the"
2) Then the system will show "REC>>CARD" or "REC>>USB" and flashing. Encoding is
performing now.
3) Start playback of cassette tape which the track you prepare to record.
4) To finish the recoding, press the " / ENTER" button. The text on LCD display stop flashing
and return to "TAPE" mode.
D) DAB/FM Radio encoding
1) Select DAB or FM mode and then select the desire radio station
2) Press the " REC" button to start the encoding.
3) Then the system will show "REC>>CARD" or "REC>>USB" and flashing. Encoding is
performing now.
4) To finish the recoding, press the " / ENTER" button. The text on LCD display stop flashing
and return to "TUNER" mode.
Remark:
-
If the radio reception signal is not strong enough, the system cannot start the encoding
process and the text "NO GOOD" will show on the LCD display.
-
The recording quality and performance for radio encoding is not stable due to interference
of radio reception. This is not a malfunction of the system.
E) Aux-in encoding
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player,
iPod, etc. To this system via a cord with 3.5mm jack plugs (not supplied).
Connect one end of this cord to the 3.5mm headphone jack on the external device and the other
end to the 3.5mm Aux-in jack on the side of the unit.
When connected in this way it is possible to:
•
Play back the music already on the connected device.
•
Encode and convert the music files from the connected device to USB/SD into MP3 format.
•
Follow the same procedure as Phono encoding described in this manual.
Track separation (by remote handset)
You can divide the recording music from Phono, Aux, Tape, DAB or FM Radio to USB/SD track
by trace during encoding. Every time when press the "
remote handset during encoding from those source to USB/SD, the system will generate a new
track and continuous the recording. The text "SAVING" will appear on LCD display one time, it
mean the unit is creating a new track successfully and perform recording continuously.
MCD1820 / English Instruction Manual
REC " button directly.
" (track separation) button once at
9
Publicité
