Publicité
Å
ı
All manuals and user guides at all-guides.com
IGNITION SYSTEM
EC622001
SPARK GAP TEST
Å For USA and CDN
ı Except for USA and CDN
EC624000
COUPLERS AND LEADS CONNECTION
INSPECTION
EC625001
"ENGINE STOP" BUTTON INSPECTION
No continuity while being pushed → Replace.
Continuity while being freed → Replace.
6 - 4
1. Disconnect the spark plug cap from spark
plug.
2. Connect the dynamic spark tester 1
(ignition checker 2) as shown.
Spark plug cap 3
G
Spark plug 4
G
3. Kick the kick starter.
4. Check the ignition spark gap.
5. Start engine, and increase spark gap until
misfire occurs. (for USA and CDN only)
Minimum spark gap:
6.0 mm (0.24 in)
1. Check:
Couplers and leads connection
G
Rust/dust/looseness/short-circuit →
Repair or replace.
1. Inspect:
"ENGINE STOP" button conduct
G
Tester (+) lead → Black/White lead 1
Tester (–) lead → Black lead 2
B/W
1
PUSH IN
FREE
–
+
ELEC
Tester selec-
B
tor position
2
Ω × 1
Publicité
