1
Å
ı
All manuals and user guides at all-guides.com
CRANKCASE AND CRANKSHAFT
EC4N5000
ASSEMBLY AND INSTALLATION
Crankshaft bearing
a
b
NOTE:
G
G
Crankshaft
Å For USA and CDN
ı Except for USA and CDN
4 - 89
1. Install:
Bearing
New
G
Bearing stopper
G
Bolt (bearing stopper)
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
Screw (bearing stopper)
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
Screw [bearing stopper (crankshaft)] 1
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
To crankcase (left and right).
Install the bearing by pressing its outer race
parallel.
To prevent the screw [bearing stopper
(crankshaft)] from becoming loose, crush the
screw head periphery a into the concave b
using a punch etc. In so doing, take care not
to damage the screwdriver receiving hole in
the screw head.
1. Install:
Crankshaft 1
G
Use the crankshaft installing tool 2, 3,
4, 5.
Crankshaft installing tool:
Pot 2:
YU-90050/90890-01274
Bolt 3:
YU-90050/90890-01275
Adapter 4:
YM-1277/90890-01277
Spacer 5:
YM-91044/90890-04081
ENG