Publicité
Å
ı
All manuals and user guides at all-guides.com
FRONT BRAKE AND REAR BRAKE
After installation, while pulling the lever in
or pushing down on the pedal, check
whether there is any brake fluid leaking
where the union bolts are installed respec-
tively at the master cylinder and caliper.
Å Front
ı Rear
5 - 26
2. Air bleed:
Brake system
G
Refer
to
"BRAKE
BLEEDING" section in the CHAPTER
3.
3. Inspect:
Brake fluid level
G
Fluid at lower level → Fill up.
Refer
to
"BRAKE
INSPECTION" section in the CHAP-
TER 3.
4. Install:
[Front]
Diaphragm
G
Master cylinder cap 1
G
Screw (master cylinder cap) 2
G
2 Nm (0.2 m · kg, 1.4 ft · lb)
[Rear]
Diaphragm
G
Reservoir tank cap 1
G
Screw (reservoir tank cap) 2
G
2 Nm (0.2 m · kg, 1.4 ft · lb)
Master cylinder guard
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
CAUTION:
ACHTUNG:
5. Install: (rear brake only)
Protector 1
G
Bolt (protector) 2
G
7 Nm (0.7 m · kg, 5.1 ft · lb)
CHAS
SYSTEM
AIR
FLUID
LEVEL
Publicité
