Tunturi Cardio Fit Bike B30 Mode D'emploi page 6

Assembly step 3
• Lead the wires for hand pulse
reading through the hole towards the
display assembly opening.
• Fit the handlebar to the upright tube
by using the shown hardware.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
• Connect the hand pulse wires and
data cable with the console.
• Fix the console to the console
bracket.
Remark:
Avoid the wires to damage during
assembly
6
Assembly step 4
• Fix seat to the seat tube
• Fit seat tube cover on seat tube
before sliding the seat tube into main
frame.
• Secure seat tube with the seat height
adjustment knob.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.