Stihl TS 480i Notice D'emploi page 2

English
Contents
1 Guide to Using this Manual......................... 2
2 Safety Precautions and Working Techni‐
ques............................................................ 2
3 Sample Applications................................. 10
4 Cutting Wheels..........................................13
5 Composite Abrasive Wheels..................... 13
6 Diamond Abrasive Wheels........................14
7 Electronic Water Control........................... 16
8 Assembling the cast arm and guard ........ 17
9 Tensioning the ribbed V‑belt..................... 21
10 Mounting an Abrasive Wheel.................... 22
11 Fuel........................................................... 23
12 Fueling...................................................... 23
13 Starting / Stopping the Engine.................. 25
14 Air Filter System........................................26
15 Engine Management.................................27
16 STIHL Injection......................................... 27
17 Spark Arresting Screen in Muffler............. 27
18 Spark Plug................................................ 27
19 Replacing the V‑belt..................................28
20 Cut-off Machine Cart.................................29
21 Storing the Machine.................................. 29
22 Maintenance and Care..............................30
23 Main Parts.................................................31
24 Specifications............................................32
25 Maintenance and Repairs......................... 33
26 Disposal.................................................... 33
27 STIHL Limited Emission Control Warranty
Statement..................................................34
1 Guide to Using this Manual
1.1 Pictograms
Pictograms that appear on the machine are
explained in this Instruction Manual.
Depending on the machine and equipment ver‐
sion, the following pictograms may appear on the
machine.
Fuel tank; fuel mixture of gasoline
and engine oil
Actuate decompression valve
Actuate manual fuel pump
Water connection, shut-off cock
2
Tensioning nut for belt
Pull starter grip
1.2 Symbols in text
WARNING
Warning where there is a risk of an accident or
personal injury or serious damage to property.
NOTICE
Caution where there is a risk of damaging the
machine or its individual components.
1.3 Engineering improvements
STIHL's philosophy is to continually improve all
of its products. For this reason we may modify
the design, engineering and appearance of our
products periodically.
Therefore, some changes, modifications and
improvements may not be covered in this man‐
ual.
2 Safety Precautions and
Working Techniques
Special safety precautions must be
taken when working with the cut-off
machine, due to the very high rota‐
tional speed of the abrasive wheel.
It is important that you read and
understand the User Manual before
commissioning and keep it in a safe
place for future reference. Non-
observance of the safety precautions
may result in serious or even fatal
injury.
Observe all applicable local safety regulations,
e.g. by trade organizations, social insurance
institutions, labor safety authorities etc.
As for employers within the European Commun‐
ity, the provision 2009/104/EC is binding – Safety
and health protection with the use of machines
and devices by employees at work.
If you have never used a power tool before: have
your STIHL dealer or other specialist show you
how to operate the machine – or attend one of
the special training courses.
0458-753-8221-D