OEG CPA-E 100 Serie Mode D'emploi page 35

OEG CPA-E 100 series
4. Installation
Warning
The flow medium may be hot and under pressure.
Therefore, it is absolutely necessary to drain the pump
completely before working on the pump and to close all
valves before loosening the screws of the pump housing.
4.4. Thermal insulation of the pump housing
The motor pump housing and the pipeline should
Note
be insulated to avoid heat losses.
The terminal box and the operating panel
Caution
must not be insulated or covered.
High-efficiency wet-running circulation pump with screwed or flanged connection
35
GB