INOXPAN S.L.
Recall Function
After switching off the hob [
•
cooking stages of all cooking zones (Booster)
minutes and seconds of programmed cooking zone-related timers
•
•
Keep warm function
Automatic cooking
•
The recall procedure is the following:
•
Press the key [
Then press [ II ] before the light stops blinking.
•
The previous settings are activated again.
"Keep warm" Function
This function allows the cooking zones to reach and automatically maintain a temperature of 42,
70 or 94°C, this to avoid liquids flowing over and pans burning.
To start the function « Keep warm » :
•
Action
42°C to engage
70°C to engage
94°C to engage
To stop
The maximum duration of keeping warm is 2 hours.
Bridge Function
This function allows the use of 2 cooking zones at the same time with the same features as a
single cooking zone. Power function is not allowed.
Action
Activate the hob
Activate the bridge
Increase bridge
Stop the bridge
Control panel locking
To avoid modification of the setting of the cooking zones , particularly when cleaning, the control
panel can be locked (with exception to the On/Off key [
Action
Lock the hob
Unlock the hob
], it is possible to recall the last settings.
]
C ontrol panel
Press once on area under [
Press twice on area under [
Press 3 times on area under [
Slide on the "SLIDER"
or press area under [
C ontrol panel
Press display [
Press simultaneously on [
of the 2 cooking zones
or
put a great pan on the 2 zones
and press on the 2 "SLIDER"
Slide on the "SLIDER"
which indicates the power
Press simultaneously on [
of the 2 cooking zones
C ontrol panel
Press [
] during 6s
Press [
] during 6s
]
]
]
] until [ 0 ]
]
]
]
]).
12
Display
[ U ] and [
]
[ U ] and [
]
[ U ] and [
]
[ 0 ] to [ 9 ]
[ 0 ]
Display
[ 0 ]
[ 0 ] and [
]
[
] blink
[
]
[ 1 ] to [ 9 ]
[ 0 ]
Display
lock light on
lock light off
EN