Stahl 8571/25 Serie Mode D'emploi page 7

Les langues disponibles

3.4

Specific Conditions of Use

• For Class I, Zone 1 applications, the flange socket must be installed in an enclosure

with "eb" increased safety.

• For Class I, Zone 1 applications, the flange socket must be installed in an enclosure

such that the creepage distances and clearances comply with the "eb" increased

safety spacing requirements of UL 60079-7.

• For Zone 21 applications, the flange socket must be installed in a dust protected "tb"

enclosure.

• For Class I, Division 2 applications, the flange socket must be installed in an enclosure

that complies with the ingress requirements for the specific application.

• For Class I, Division 2 applications, the flange socket must be installed in the enclosure

such that the creepage and clearance comply with the requirements of specific

application.

• For Class II, Division 1 applications, the flange socket must be installed in a

dust-ignition proof enclosure.

• For Class II, Division 1 applications, the flange socket must be installed in the

enclosure such that the creepage distances and clearances comply with the

requirements of specific application.

• Lock the hinged cover using the bayonet ring if the plug is not inserted.

• The flange socket is suitable for connection to a 8571/22 plug of the same

configuration and electrical ratings.

3.5

Modifications and Alterations

Explosion hazard due to modifications and alterations to the device!

Non-compliance results in severe or fatal injuries.

• Do not modify or change the device.

No liability or warranty for damage resulting from modifications and

alterations.

294417 / 8571665300

2022-07-28·IO00·III·en·00

DANGER

SolConeX

Flange socket, 30 A

8571/25 series

Safety Notes