Stahl 8571/25 Serie Mode D'emploi page 19

Les langues disponibles

7.3

Installation

Explosion hazard due to insufficient protective measures!

Non-compliance results in severe or fatal injuries.

• Select suitable conductors to ensure that the maximum

• Lay cables in intrinsically safe circuit separately to cables in

• When using core end sleeves, attach them using a suitable tool.

• Use only separately tested cable entries and stopping plugs

• The conductor insulation must be touching the terminal.

• Do not damage the conductor (e.g. nicking)

• Always connect the protective conductor.

Explosion hazard in the case of installation in special dust hazardous

areas!

Non-compliance results in severe or fatal injuries.

• Do not use the device in areas where there are processes

Explosion hazard if seal is insufficient and/or service temperature

is too high!

Non-compliance results in severe or fatal injuries.

• Completely seal the bayonet ring of the plug and of the hinged

• Securely seal and lock the enclosure.

• Make sure the service temperature range is maintained

294417 / 8571665300

2022-07-28·IO00·III·en·00

permissible conductor temperatures are not exceeded.

non-intrinsically-safe circuits. The distance measurements for

this can be found in the "Separating intrinsically safe circuits

from non-intrinsically-safe circuits" section.

with a US type examination certificate.

when stripping it.

generating strong charges, machine friction processes,

separation processes and electrospray processes

(e.g. around electrostatic coating systems)

and pneumatically generated dust.

cover to obtain the degree of protection.

(see the "Technical data" chapter).

Mounting and Installation

DANGER

SolConeX

Flange socket, 30 A

8571/25 series