Stahl 8571/25 Serie Mode D'emploi page 21

Les langues disponibles

Commissioning

Explosion hazard due to incorrect installation!

Non-compliance results in severe or fatal injuries.

• Check the device for proper installation before commissioning.

• Comply with national regulations.

Damage or destruction of the device by arc and high pressure is

possible if improper switching operations are used!

Non-compliance can result in severe or fatal injuries.

• Quickly switch the device on and off completely.

• Avoid switching positions between 0 and I (ON and OFF).

Before commissioning, ensure the following:

• Check the mounting and installation.

• The device must not be damaged.

• Remove any foreign objects.

• If necessary, clean the connection chamber.

• Monitor whether all screws and nuts have been tightened securely.

• Monitor whether all conductors have been clamped firmly.

• Observe the line voltage.

Operation

The flange socket may only be operated when fully mounted.

The flange socket can only be switched with the plug inserted.

If the plug has been disconnected, lock the hinged cover with the

bayonet ring.

Only type 8571/22 plugs from R. STAHL may be used.

294417 / 8571665300

2022-07-28·IO00·III·en·00

DANGER

WARNING

SolConeX

Flange socket, 30 A

8571/25 series

Commissioning