Publicité
Les langues disponibles
Les langues disponibles
Maintenance, Overhaul, Repair
DE
10
Maintenance, Overhaul, Repair
US
FR
10.1 Maintenance
IT
• Consult the relevant local and national regulations to determine the type and extent of
inspections.
ES
• Tailor inspection intervals to the operating conditions.
RU
NL
At a minimum, check the following points during maintenance on the device:
• Whether the conductors have been clamped properly
DK
• Whether the enclosure, seals and surface are damaged
SE
• Whether there is dirt in the sockets
FI
• Whether the permissible temperatures are complied with (according to UL 60079)
• Whether it is used as intended
PT
GR
10.2 Overhaul
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
10.3 Repair
KR
CN
22
SolConeX
Flange socket, 30 A
8571/25 series
Overheating and explosion hazard due to defective switching contacts!
Non-compliance results in severe or fatal injuries.
• Replace the complete socket flange after each short circuit in the
main circuit of the switch because the state of the switching
contacts cannot be checked in hermetically sealed equipment.
Observe the relevant national regulations in the country of use.
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Hermetically sealed connections are to be repaired only in
accordance with the manufacturer's description.
• Repairs are not permitted.
DANGER
DANGER
DANGER
294417 / 8571665300
2022-07-28·IO00·III·en·00
Publicité
