Stahl 8571/25 Serie Mode D'emploi page 18

Mounting and Installation
DE
7.2 Mounting/Dismounting, Operating Position
US
FR
IT
ES
RU
7.2.1 Mounting
The connected 8571/25 flange socket is intended to be mounted on an Ex e enclosure
NL
(metal or plastic). Therefore, the following installation requirements have to be met:
DK
SE
Required fastening dimensions
See chapter 7.1.
FI
PT
Wall thickness of the enclosure
GR
Metal enclosure: 1.5 to 3.0 mm/0.059 to 0.118 inch
PL Plastic enclosure: 2.2 to 3.5 mm/0.087 to 0.138 inch
CZ
Maximum surface roughness of the enclosure face for the seal
SK
Metal enclosure: R
HU
Plastic enclosure: R
SL
Mounting auxiliary contacts
RO
BG
LV
LT
EE
CH
KR
CN
18
SolConeX
Flange socket, 30 A
8571/25 series
This device is suitable for outdoor and indoor use.
The seal of the device ensures the IP degree of protection.
= approx. 0.43 µm/R
q
= approx. 7.2 μm
z
For mounting instructions for installing the auxiliary contacts, see installation
note 8570/8571 (8570607300).
= approx. 0.38 µm
a
• Open the enclosure.
• Snap the auxiliary
contacts into place
optionally in the left-hand
or right-hand seat.
Double equipping is
possible.
• Close the enclosure
11203E00
294417 / 8571665300
2022-07-28·IO00·III·en·00