Kozy Heat Fireplaces Komfort Zone KZK-1510A Mode D'emploi page 31

FIGURE 3.12 shows installation of combustible wall finish up to 1" thick for the Bellingham 38 & Bellingham 44. This
combustible material goes over any required non-combustible materials as shown in FIGURE 3.6 on page 25 for Belling-
ham 38 or Figure 3.7 on page 26 for Bellingham 44.
This 1" (25mm) combustible material is able to go down to the fireplace finishing edge.
See FIGURE 3.9 on page 28 for up to 1" (25mm) thick combustible material installation around the KZK air discharge
grille.
Bellingham 38 & Bellingham 44
Figure 3.12 - Bellingham 38 & Bellingham 44 Combustible Wall Finish and Surround
KZK-1510A 31 Rev. 10 — May 2023